LAND ROVER LT230 6L80E ADAPTER

LAND ROVER LT230 6L80E Transfer Case Adaptor

LT230 to 6L80E adapter 32 spline fits Land Rover with GM Automatic transmission.

Land Rover / Range Rover / Discovery Series 2 vehicles being fitted with the GM GEN4 engines & 6L80 6-speed transmission up to the full-time 4WD LT230 transfer case. The 6L80 transmission length is approximately 60mm longer than the original ZF transmission. To compensate for this extra length, the tail shafts will require modification.

This kit will also suit the GM 6L90E automatic transmission with a 32-tooth spline output shaft.
The 6L90 case is 35mm longer than the 6L80 which will push the transfer case approximately 95mm towards the rear of the vehicle. To compensate for this extra length, the transfer case mounts and tail shafts will require modification.

Kit Includes

Transfer case adaptor housing
6L80 output (32 tooth spline) to transfer input adaptor shaft
Bolts, dowels, seals etc

To Suit

Land Rover / Range Rover LT230 transfer case

Notes

Discovery Series 2
The transfer case mounts have been designed to suit the LandRover Discovery 2 models, other models may require modifications to sui

Product Features

Easy install - bolts directly to your GM 4x4 transmission housing and Land Rover LT230 transfercase housing.

For builds that are 350HP to 800HP you should run this part.

LT230 to 6L80E adapter 32 spline fits Land Rover Defender & Range Rover

Built in Iowa and engineered for High output/high HP this adapter and spline will allow you to mate your Land Rover LT230 transfercase to your 6L80E automatic transmission (32 spline). This is the kit that we use in-house for all of our LS and 5.7 liter swaps where we use the 6L80E automatic transmission